Engineered to a higher standard and proven to thrive in harsh environments, the PE Series excels at dock work, transporting, order picking and more. 0003
Learning and practicing safe forklift operating habits is the key to sustained warehouse productivity. Crown Equipment's DP MoveSafe Operator Training progra. Used Crown Reach Forklift, 3500 lb. Capacity forklift. Pre-owned Crown.
The powerful Crown-built AC Drive Motor is specifically engineered for lift truck applications. It delivers greater torque for improved acceleration and smoother plug reversals.
The PE Series end control pallet truck is a heavy-duty, electric power lift truck that can be used as a walkie or rider truck for low-level order picking, loading, unloading and transporting.
Crown RR 3520-35 Reach Truck Great in condition! Good Machine@ a good price!!! 2012 Caterpillar EP 4000 Electric Forklift Excellent machine! CROWN Forklift Truck Fault Codes list CROWN Diagnostic Fault Codes (Flash Codes) DFC - PROBABLE FAULT - FAULT ACTION. CORRECTIVE ACTION FIRST CHECK 12 NONE. Signifies the end of one pass through the fault list. None, used as end of the fault listidentification 141 (14) ECTRangeLow. Coolant Sensor failure or shorted to GND TurnOnMil. Check ECT sensor connector and wiring for a short to. Intelligence and technology separate Crown's RR/RD series from other reach trucks by delivering the right speed, ease of use and performance. With smart systems, an intuitive all-in-one handle and a Load Handling Assist option, this truck has pinpoint accuracy and control in narrow aisles.
Load Capacity
6000 – 8000 lb
Power (Electric)
24 V / 330 – 930 Ah
Head Length
36.7 – 43.2 in
Width Overall
36 in
Nominal Fork Length
36 – 144 in
For operators working in confined spaces, visibility is essential. To this end, the unique design geometry of the RC Series outpaces all others where it counts the most: in trailers, narrow aisles, and areas congested with pedestrians, equipment and products. 0003
The power unit curves in on the right side (where operators look most often). This contour, along with the low profile power unit translates into industry-leading visibility.0003
The mast and pillar design also enhances forward visibility. This has been achieved through the clean routing of hydraulics and chains as well as the orientation of the pillar itself.
The RC Series stand-up counterbalance forklift features a side-stance operator compartment that maximizes visibility and allows for easy entry/exit in applications where the operator is frequently on and off the truck.
Load Capacity
3000 – 4000 lb
Max. Lift Height
276 in
Power (Electric)
36 V / 775 – 1240 Ah
Width Overall
42 in
The Crown RM/RMD Series offers unmatched, all-around visibility – at ground level, eye level, height and in all directions around the operator.
The RMD Series is the only narrow-aisle rider reach truck with a MonoLift mast. The forks extend to allow the truck to deposit or retrieve pallets that are positioned in the rack two deep.
Load Capacity
3200 lb
Power (Electric)
36 volt / 930 – 1240 Ah
Head Length
60.9 – 65.3 in
Max Lift Height
400 in
Crown Reach Truck Manual
The TSP Series features a stronger mast, higher reach, and narrow footprint, allowing you make the most of your storage space.0003
Crown’s MonoLift Mast provides the stability needed for operators and loads up to six stories in the air.0003
Crown’s exclusive MonoLift mast includes strengthened boxed-in sections and heavy gauge steel. As a result, there’s less twisting and swaying than with traditional, dual upright masts.
The TSP 6000 Series is a man-up turret stockpicker with a max lift height of 495 inches. This series can handle full pallet loads on either side of the aisle due to the pivoting design of the auxiliary mast and fork carriage.
Load Capacity
3000 lb
Power (Electric)
48 V
Max. Lift Height
495 in
Max. Platform Lift Height
442 in
The PTH Series features solid construction and generous use of steel – especially at critical stress points – to deliver long-lasting performance. 00030003
Crown Reach Truck Singapore
The durability of the PTH Series is enhanced by a reinforced lower handle, strong C-channel forks made of thick steel, cross braces and steel forgings on lift link arms and box-style push rods.
00030003In addition, the PTH Series uses yellow chromate pins and shafts for corrosion protection and hard chrome pistons to minimize rust.
The PTH hand pallet truck features a 5000 lb weight capacity, heavy-duty, one piece formed forks for maximum durability, and a hydraulic system tested to more than one million cycles.
Model Numbers
PTH 50 27-48, PTH 50 20-48, PTH 50 20-36
Power
Manual
Load Capacity
5000 lb
Max. Lift Height
5 in
Width
15.8 – 27 in
Fork Length
36 – 72 in